PEMBUATAN LAPISAN TIPIS TiO2 -DOPED LOGAM M (M= Ni, Cu dan Zn) DENGAN METODA DIP-COATING DAN APLIKASI SIFAT KATALITIKNYA PADA PENJERNIHAN AIR RAWA GAMBUT
DOI:
https://doi.org/10.25077/jrk.v2i1.111Abstract
Â
ABSTRACT
Â
Preparation of TiO2-doped M (M = Ni, Zn and Cu) has been prepared on glass substrate using dip-coating technique. Titanium isopropoxide (TIP), Ni(OAct)2.4H2O, Zn(OAct)2.2H2O dan Cu(OAct)2 were used as starting materials and diethanolamine (DEA) as additive in isopropanol solution. Solutions were prepared by mixing of various concentration of metals (1, 3 and 5 mol %)  in 0.5 M TIP solution. Thin films were performed by immersion of glass substrate into solution by withdraw speed of 20 cm/min. Coated glass were dried at 100 – 110°C and heated at 500°C the process were repeated for several time. The product was characterized by XRD and showing TiO2 layer of anatase structure. EDX analysis has shown that thin films have found of Ti and doped-metal. Their crystallized sizes were calculated by Scherrer formula shown that it obtained in various in range of 12-21 nm. According to transformation effectively of titania doped M in peat swam water shown that catalytic activity 34.4 – 53.7% for the irradiation during 24 hours.
Â
Keywords : titania, thin films, photocatalytic properties
References
M. R. Hoffman, S. T. Martin, W. Choi, D.W. Bahneman, Enviromental Aplication of semiconductors Photocatalysts. Chemical Review, 95(1): 71 – 74, (1995).
J. Nair, P. Nair, F. Mizukami, Y. Oosawa, and T. Okubo, Microstructure and Phasa Transformation Behavior of Doped Nanostructured titania, Material Research Bulletin, 34(8), (1999).
Z. Zhang, C. Wang, R. Zakaria, and J. Y. Ying, Role of Particle Size in Nanocrystalline TiO2-based Photocatalyst. Journal of Physical and Chemistry B., 102: 10871-10878, (1998).
E. Sanches, T. Lopez, R. Gomez, Bokhini, Synthesis and Characterization Of Sol – gel Pt/ TiO2 Catalys. Journal of solid state Chemistry,112: 309-314, (1996).
B. Xin, L. Jing. Effects of Simultaneously Doped and Deposition Ag on the Photocatalytic Activity and Surface States of TiO2. Journal of Physical and Chemistry B, 109: 2805 – 2809, (2005).
G. Zao, H. Kosuka, S. Sakka, Preparation of TiO2 Coating Film Containing Pd Fine particles by Sol – Gel Method, Journal of Sol – Gel Science and Technology, 4: 37-47, (1995).
U. Schubert, H. Nicole, Synthesis of Inorganic material Willey – VCH. Jerman. 2000, 63 – 108.
S. Arif, T. Terazawa, T. Ban, Y. Ohya and Y. Takahasi, Dip Coating of Metal Films from Metal Acetate-Acetol Hydrazone System, in Ceramic Processing Science VI, 329 – 334, (2001).
S. Arif, T. Terazawa, T. Ban, Y. Ohya, Y. Takahashi, Direct Patterning of Nickel Films on Glass Substrates, Material Science and Engineering B,100: 132 – 135, (2003).
F. Boccuzzi, A. Chiorino, S. Tsubata, and M. Haruta, FTIR Study of Carbon Monoxidda Oxidation and Scrambling at Temperature Over Gold Supported and ZnO2 and TiO2, Journal of Physical and Chemistry, 100: 3625 – 3629, (1996).
C. S. Wong, A. Linsebigler, G. J. Fan, and J. T. Yates, Photooxidation of CH3Cl on TiO2 (110) Single Crystal and Powdered TiO2 Surfaces, Journal of Physical and Chemistry, 99(1): 335 – 338, (1995).
S. Violet, P. Muthukumar, Gaikwad SPS.P, Synthesis of Mesoporous Rutile, Journal of Material Sscience Letter, 58: 2514 – 2516, (2004).
H. Sanjaya, Pembuatan Lapisan Tipis Titania Pada Plat Kaca Dengan Metoda Celupan dan Uji fotokatalisnya pada air rawa Gambut. Skripsi Sarjana Kimia. UNAND. Padang, 2005.
Rapani, Fototransformasi Induksi Air Rawa Gambut Melalui Bantuan Fotokatalis Lempeng Seng Oksida (ZnO). Tesis Magister Sains, PPs UNAND. Padang, 2003.
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
Please find the rights and licenses in Jurnal Riset Kimia (J. Ris. Kim). By submitting the article/manuscript of the article, the author(s) agree with this policy. No specific document sign-off is required.
1. License
The use the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution 4.0 International License.Â
2. Author(s)' Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3. User Rights
Under the Creative Commons license, the journal permits users to copy, distribute, and display the material for any purpose. Users will also need to attribute authors and J. Ris. Kim on distributing works in the journal and other media of publications.
4. Rights of Authors
Authors retain all their rights to the published works, such as (but not limited to) the following rights;
- Copyright and other proprietary rights relating to the article, such as patent rights,
- The right to use the substance of the article in own future works, including lectures and books,
- The right to reproduce the article for own purposes,
- The right to self-archive the article,
- The right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
5. Co-Authorship
If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. J. Ris. Kim will not be held liable for anything that may arise due to the author(s) internal dispute. J. Ris. Kim will only communicate with the corresponding author.