Struktur dan Sifat Dielektrik Senyawa Aurivillius CaBi3LaTi4O15 yang Disintesis dengan Teknik Hidrotermal
DOI:
https://doi.org/10.25077/jrk.v11i1.343Keywords:
Aurivilius phase, Hydrothermal, Space group A21am, DielectricAbstract
Synthesis of four-layer Aurivillius CaBi3LaTi4O15 has been successfully carried out by hydrothermal technique using NaOH 4 M as mineralizer. The reaction was carried out at 220 °C for 72 h. Crystal structure, morphology, and dielectric properties were analyzed in this study. X-ray diffraction confirmed that the single-phase product was successfully obtained. The refinement result shows the product has orthorhombic crystal structure with space group A21am. The morphology analyzed using SEM shows plate-like grains are observed, which is characteristic of Aurivillius phase. Dielectric curves show peaks at 585 °C which indicate ferroelectric transition temperature.
References
Fukunaga, M., Takesada, M. & Onodera, A., Ferroelectricity in Layered Perovskites as a Model of Ultra-Thin Films. World J. Condens. Matter Phys., 06(03): 224–243 (2016).
Reddyprakash, M., Rout, S. K., Satapathy, A., Sinha, T. P. & Sariful, S. M., Dielectric and ferroelectric properties of samarium substituted BaBi4Ti4O15 Aurivillius oxides. Ceram. Int., 42(7): 8798–8803 (2016).
Badapanda, T., Harichandan, R., Nayak, S., Mishra, A. & Anwar, S., Frequency and temperature dependence behaviour of impedance, modulus and conductivity of BaBi4Ti4O15 aurivillius ceramic. Process. Appl. Ceram., 8(3): 145–153 (2014).
Wendari, T. P., Arief, S., Mufti, N., Suendo, V., Prasetyo, A., Ismunandar., Baas, J.,Blake, G.R., Zulhadjri., Synthesis, structural analysis and dielectric properties of the double-layer Aurivillius compound Pb1-2xBi1.5+2xLa0.5Nb2-xMnxO9. Ceram. Int., 45(14): 17276–17282 (2019).
Sivanagi Reddy, E., Sukumaran, S. & James Raju, K. C., Microwave assisted synthesis, sintering of lead-free ferroelectric CaBi4Ti4O15 ceramics. Mater. Today Proc., 3(6): 2213–2219 (2016).
Pavlović, N., Koval, V., Dusza, J. & Srdić, V. V., Effect of Ce and La substitution on dielectric properties of bismuth titanate ceramics. Ceram. Int., 37(2): 487–492 (2011).
Fei, L., Zhou, Z., Hui, S. & Dong, X., Effects of La3+ substitution on structure and temperature dependence of electrical properties of CaBi4Ti4O15–Bi4Ti3O12 ceramics. J. Mater. Sci. Mater. Electron., 26(9): 6843–6847 (2015).
Zulhadjri., Prijamboedi, B., Nugroho, A. A., Mufti, N., Fajar, A., Palstra, T. T. M. & Ismunandar., Aurivillius phases of PbBi4Ti4O15 doped with Mn3+ synthesized by molten salt technique: Structure, dielectric, and magnetic properties. J. Solid State Chem., 184(5): 1318–1323 (2011).
Xu, Z., Chu, R., Hao, J., Yao, Z. & Li, H., Hydrothermal preparation and electrical properties of Aurivillius phase SrBi4Ti4O15 ceramic. Ferroelectrics, 516(1): 148–155 (2017).
Shannon, R. D., Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Crystallogr. Sect. A, 32(5): 751–767 (1976).
Tanwar, A., Verma, M., Gupta, V. & Sreenivas, K., A-site substitution effect of strontium on bismuth layered CaBi4Ti4O15 ceramics on electrical and piezoelectric properties. Mater. Chem. Phys., 130(1–2): 95–103 (2011).
Zeng, J., Li, Y., Wang, D. & Yin, Q., Electrical properties of neodymium doped CaBi4Ti4O15 ceramics. Solid State Commun., 133(9): 553–557 (2005).
Suárez, D. Y., Reaney, I. M. & Lee, W. E., Relation between tolerance factor and Tc in Aurivillius compounds. J. Mater. Res., (2001). doi:10.1557/JMR.2001.0433
Diao, C. L., Zheng, H. W., Gu, Y. Z., Zhang, W. F. & Fang, L., Structural and electrical properties of four-layers Aurivillius phase BaBi3.5Nd0.5Ti4O15 ceramics. Ceram. Int., 40(4): 5765–5769 (2014).
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
Please find the rights and licenses in Jurnal Riset Kimia (J. Ris. Kim). By submitting the article/manuscript of the article, the author(s) agree with this policy. No specific document sign-off is required.
1. License
The use the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution 4.0 International License.Â
2. Author(s)' Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3. User Rights
Under the Creative Commons license, the journal permits users to copy, distribute, and display the material for any purpose. Users will also need to attribute authors and J. Ris. Kim on distributing works in the journal and other media of publications.
4. Rights of Authors
Authors retain all their rights to the published works, such as (but not limited to) the following rights;
- Copyright and other proprietary rights relating to the article, such as patent rights,
- The right to use the substance of the article in own future works, including lectures and books,
- The right to reproduce the article for own purposes,
- The right to self-archive the article,
- The right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
5. Co-Authorship
If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. J. Ris. Kim will not be held liable for anything that may arise due to the author(s) internal dispute. J. Ris. Kim will only communicate with the corresponding author.