SINTESIS LAPISAN TIPIS TiO2 BERPORI YANG DIMODIFIKASI OLEH NITROGEN DENGAN METODE PEROKSO SOL-GEL, KARAKTERISASI DAN APLIKASINYA SEBAGAI MATERIAL PEMBERSIH DIRI (SELF CLEANING MATERIAL)

Authors

DOI:

https://doi.org/10.25077/jrk.v9i2.286

Keywords:

anatase, porous, photocatalyst, self-cleaning, superhydrophilic

Abstract

The photocatalytic properties of TiO2 compound in anatase phase can be activated under visible light by nitrogen modification and its ability can be increased by generated porous structure using polietilen glikol (PEG) on TiO2 thin film surface. The porous N/TiO2 thin films were prepared by heating aqueous peroxotitanate thin films by addition of polietilen glikol (PEG) deposited uniformly on superhydrophilic uncoated glass at 500 oC for 1 h. The result of X-ray diffraction (XRD) confirmed the resence of only anatase phase for all samples. The UV-Vis spectroscopy showed the synthesized porous N/TiO2 thin films exhibit the absorption in the visible range (400-500 nm). Photocatalytic activity of porous N/ TiO2 thin films were evaluated by using fourier transform-infrared spectroscopy (FTIR) to determine the ability of this photocatalyst for stearic acid degradation under visible light irradiation. The result showed that N/TiO2/PEG-2.1 thin film degraded the stearic acid was about 87,86%, which was 1,12 times higher than that of N-doped TiO2 and 9,9 times higher than that of undoped TiO2 thin film.

Vollume 9 No.2 2016

Downloads

Published

2017-10-21

How to Cite

Wellia, D. V. (2017). SINTESIS LAPISAN TIPIS TiO2 BERPORI YANG DIMODIFIKASI OLEH NITROGEN DENGAN METODE PEROKSO SOL-GEL, KARAKTERISASI DAN APLIKASINYA SEBAGAI MATERIAL PEMBERSIH DIRI (SELF CLEANING MATERIAL). Jurnal Riset Kimia, 9(2), 6. https://doi.org/10.25077/jrk.v9i2.286

Issue

Vol. 9 No. 2 (2016): March

Section

Articles

Citation Check

License

Please find the rights and licenses in Jurnal Riset Kimia (J. Ris. Kim). By submitting the article/manuscript of the article, the author(s) agree with this policy. No specific document sign-off is required.

1. License

The use the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution 4.0 International License. 

2. Author(s)' Warranties

The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).

3. User Rights

Under the Creative Commons license, the journal permits users to copy, distribute, and display the material for any purpose. Users will also need to attribute authors and J. Ris. Kim on distributing works in the journal and other media of publications.

4. Rights of Authors

Authors retain all their rights to the published works, such as (but not limited to) the following rights;

  • Copyright and other proprietary rights relating to the article, such as patent rights,
  • The right to use the substance of the article in own future works, including lectures and books,
  • The right to reproduce the article for own purposes,
  • The right to self-archive the article,
  • The right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

5. Co-Authorship

If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. J. Ris. Kim will not be held liable for anything that may arise due to the author(s) internal dispute. J. Ris. Kim will only communicate with the corresponding author.