Corrosion Analysis on Stainless Steel (SS304) Using A Coating Method Based On Silica from Natural Sand of Hukurila Village

Authors

  • Stevi Silahooy Department of Petroleum Engineering, Faculty of Engineering, Pattimura University, Indonesia
  • Geovanny Branchiny Imasuly Department of Petroleum Engineering, Faculty of Engineering, Pattimura University, Indonesia
  • Wilma Latuny Department of Industrial Engineering, Faculty of Engineering, Pattimura University, Indonesia
  • Delpina Nggolaon Department of Chemical Engineering, Faculty of Engineering, Pattimura University, Indonesia

DOI:

https://doi.org/10.25077/jrk.v16i2.808

Keywords:

coprecipitation, silica powder, coating, corrosion rate

Abstract

Corrosion analysis was performed on stainless steel (SS304) coated with silica extracted from silica sand in Hukurila Village using the coprecipitation method. The XRF results showed an increase in silica content from 58.118% to 81.247%, indicating high purity. XRD testing revealed that the silica was amorphous, while SEM analysis showed that the silica powder particles were irregular in shape and size, and tended to undergo agglomeration. The silica was then applied as a coating on SS304 using Nippon Paint with silica-to-paint weight ratios of 95:5, 90:10, and 80:20. The samples were tested in a 3.5% NaCl solution for 7 days using polarization methods on a potentiostat to measure corrosion resistance. The results showed that the 80:20 weight ratio provided the highest improvement in corrosion resistance. This enhancement is attributed to the more compact and uniform coating structure formed at higher silica loading, which effectively minimizes micro-pores, strengthens the barrier effect, and suppresses localized pitting corrosion.

References

1. Goren, A. Y., Dincer, I., Gogoi, S. B., Boral, P. & Patel, D., Recent developments on carbon neutrality through carbon dioxide capture and utilization with clean hydrogen for production of alternative fuels for smart cities. Int. J. Hydrogen Energy, 79(July): 551–578 (2024).

2. Pauliuk, S., Wang, T. & Müller, D. B., Steel all over the world: Estimating in-use stocks of iron for 200 countries. Resour. Conserv. Recycl., 71: 22–30 (2013).

3. Jin, C., Qian, F. & Feng, F., Effect of variable drill pipe sizes on casing wear collapse strength. J. Pet. Sci. Eng., 195(December 2019): 107856 (2020).

4. Li, L., Hubler, M. H. & Xi, Y., Modeling the corrosion of steel casing and the damage of well cement in a borehole system. Constr. Build. Mater., 259: 1–23 (2020).

5. Mubarak, G., Verma, C., Barsoum, I., Alfantazi, A. & Rhee, K. Y., Internal corrosion in oil and gas wells during casings and tubing: Challenges and opportunities of corrosion inhibitors. J. Taiwan Inst. Chem. Eng., 150(September): 1–8 (2023).

6. Jiang, C. yin., Liu, X. zhou., Li, X. juan., Fu, G. wei., Zhang, K. li., Wang, J. & Xie, C. dong., Preparation and anti-corrosion performance of temperature-resistant selfhealing coating for L80 Pipe. Int. J. Electrochem. Sci., 18(4): 100041 (2023).

7. Santos, L. R. L., Marino, C. E. B. & Riegel-Vidotti, I. C., Silica/chitosan hybrid particles for smart release of the corrosion inhibitor benzotriazole. Eur. Polym. J., 115(June): 86–98 (2019).

8. Pramana, A. A. & Fadillah, Y. R., Analysis of Corrosion in Production Tubing Using Olga Simulator. PETRO Jurnal Ilm. Tek. Perminyakan, 11(2): 47–51 (2022).

9. Niu, L. & Cheng, Y. F., Development of innovative coating technology for pipeline operation crossing the permafrost terrain. Constr. Build. Mater., 22(4): 417–422 (2008).

10. Senna, C. M., Oliveira, V. L. de C., Santos, D., Pessotti de Deus, E., Soares, M. & Miranda, W., Coatings for Saltwater Pipelines. 6495(9): 266–272 (2018).

11. Setiawan, A., Kristina Dewi, A. & Mukhlis., Pengaruh Surface Treatment Terhadap Ketahanan Korosi Baja Karbon Tercoating Zinc Fosfat Pada Media Asam Sulfat. J. Teknol., 11(1): 57–66 (2019).

12. Riaz, U., Nwaoha, C. & Ashraf, S. M., Recent advances in corrosion protective composite coatings based on conducting polymers and natural resource derived polymers. Prog. Org. Coatings, 77(4): 743–756 (2014).

13. Rajkumar, R. & Vedhi, C., A study of corrosion protection efficiency of silica nanoparticles acrylic coated on mild steel electrode. Vacuum, 161(October 2018): 1–4 (2019).

14. Arief, H., Pramudita, M. & Pitaloka, A. B., Synergistic Ability of Tannin – Silica as a Corrosion Inhibitor with the Addition of KI to Mild Steel in Demineralized Water. World Chem. Eng. J., 7(1): 11 (2023).

15. Munasir., Triwikantoro., Zainuri, M. & Darminto., Synthesis of SiO2 nanopowders containing quartz and cristobalite phases from silica sands. Mater. Sci. Pol., 33(1): 47–55 (2015).

16. Munasir., Rohmawati, L., Taufiq, A. & Darminto., Amorphous SiO2 Nanoparticles from Natural Sands: Structure and Porosity. C. J Nat Sci, 19(3): 563–579 (2020).

17. Taufiq, A., Nikmah, A., Hidayat, A., Sunaryono, S., Mufti, N., Hidayat, N. & Susanto, H., Synthesis of magnetite/silica nanocomposites from natural sand to create a drug delivery vehicle. Heliyon, 6(4): (2020).

18. Saragi, T., Permana, B., Saputri, M., Safriani, L., Rahayu, I. & Risdiana, R., Sintesis Nanopartikel Magnetik Dengan Metode Kopresipitasi. J. Mater. dan Energi Indones., 7(02): 17 (2018).

19. -, M., Shofiah, S. & Suharyadi, E., Sintesis Nanopartikel Nickel Ferrite (NiFe2O4) dengan Metode Kopresipitasi dan Karakterisasi Sifat Kemagnetannya (Halaman 20 s.d. 25). J. Fis. Indones., 19(56): 20–25 (2015).

20. Tjokrosapoetro, S, Achdan, A, Suwitodirdjo, S, Rusmana, E, Abidin, H. ., Peta Geologi Lembar Masohi Skala 1:250.000. Pus. Penelit. dan Pengemb. Geol., (1993).

21. Umaminingrum, M. T. & Purwaningtyas, F. Y., Validasi metode analisa penetapan kadar ammonium klorida di PT. Novapharin Pharmaceutical Industries. J. Integr. Proses dan Lingkung., 1(1): 18–23 (2023).

22. Khalifa, M., Hajji, M. & Ezzaouia, H., Impurity removal process for high-purity silica production by acid leaching. EPJ Web Conf., 29: 2–5 (2012).

23. Hasanah, M., Sembiring, T., Sebayang, K., Humaidi, S., Rahmadsyah., Saktisahdan, T. J., Handoko, F., et al., Extraction Of Silica Dioxide (SiO2) From Mount Sinabung Volcanic Ash with Coprecipitation Method. IOP Conf. Ser. Mater. Sci. Eng., 1156: 1–5 (2021).

24. Aisyah, N., Rifai, H., Maisonneuve, C. B. D. La., Oalmann, J., Forni, F., Eisele, S., Phua, M., et al., Scanning electron microscope (SEM) imaging and analysis of magnetic minerals of lake Diatas peatland section DD REP B 693. J. Phys. Conf. Ser., 1481(1): (2020).

25. Silahooy, S., Analisis Serbuk Silika Amorf (SiO2) Berbahan Dasar Pasir. Scie Map J, 2(2): 75–78 (2020).

26. Gąsiorek, J., Gąsiorek, A., Babiarczuk, B., Jones, W., Simka, W., Detyna, J., Kaleta, J., et al., Anticorrosion properties of silica-based sol-gel coatings on steel – The influence of hydrolysis and condensation conditions. Ceram. Int., 48(24): 37150–37163 (2022).

27. Pourhashem, S., Saba, F., Duan, J., Rashidi, A., Guan, F., Nezhad, E. G. & Hou, B., Polymer/Inorganic nanocomposite coatings with superior corrosion protection performance: A review. J. Ind. Eng. Chem., 88: 29–57 (2020).

28. Samad, U. A., Alam, M. A., Abdo, H. S., Anis, A. & Al-Zahrani, S. M., Synergistic Effect of Nanoparticles: Enhanced Mechanical and Corrosion Protection Properties of Epoxy Coatings Incorporated with SiO2 and ZrO2. Polymers (Basel)., 15(14): (2023).

Downloads

Published

2025-09-30

How to Cite

Silahooy, S., Branchiny Imasuly, G., Latuny, W., & Nggolaon, D. (2025). Corrosion Analysis on Stainless Steel (SS304) Using A Coating Method Based On Silica from Natural Sand of Hukurila Village. Jurnal Riset Kimia, 16(2), 59–68. https://doi.org/10.25077/jrk.v16i2.808

Issue

Vol. 16 No. 2 (2025): September

Section

Articles

Citation Check

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Please find the rights and licenses in Jurnal Riset Kimia (J. Ris. Kim). By submitting the article/manuscript of the article, the author(s) agree with this policy. No specific document sign-off is required.

1. License

The use the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution 4.0 International License. 

2. Author(s)' Warranties

The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).

3. User Rights

Under the Creative Commons license, the journal permits users to copy, distribute, and display the material for any purpose. Users will also need to attribute authors and J. Ris. Kim on distributing works in the journal and other media of publications.

4. Rights of Authors

Authors retain all their rights to the published works, such as (but not limited to) the following rights;

  • Copyright and other proprietary rights relating to the article, such as patent rights,
  • The right to use the substance of the article in own future works, including lectures and books,
  • The right to reproduce the article for own purposes,
  • The right to self-archive the article,
  • The right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the article's published version (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

5. Co-Authorship

If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. J. Ris. Kim will not be held liable for anything that may arise due to the author(s) internal dispute. J. Ris. Kim will only communicate with the corresponding author.

Similar Articles

1 2 3 4 5 6 7 8 > >> 

You may also start an advanced similarity search for this article.